FreeDownloadResetterCanonServiceToolV3200
CLICK HERE >>>>> https://urlca.com/2twnac
How to Reset Canon Printers with Service Tool V3200
If you have a Canon printer that is showing an error message such as \"ink absorber is full\" or \"service required\", you may need to reset it using a special program called Service Tool V3200. This program can help you restore your printer to its normal working condition by resetting the waste ink counter and other settings. In this article, we will show you how to download and use Service Tool V3200 for free.
What is Service Tool V3200
Service Tool V3200 is a software application that can reset various parameters of Canon printers, such as the waste ink counter, the ink level, the EEPROM data, etc. It can also perform some maintenance functions, such as cleaning the printhead, aligning the print head, printing test pages, etc. Service Tool V3200 supports many models of Canon printers, such as E series, G series, IB series, IP series, IX series, MB series, MG series, MX series, TS series, TR series, XK series, etc. You can check the full list of supported models on the official website of Service Tool V3200.
How to Download Service Tool V3200 for Free
There are many websites that claim to offer Service Tool V3200 for free download, but some of them may contain viruses or malware that can harm your computer or printer. Therefore, you should be careful when choosing a source for downloading Service Tool V3200. One of the reliable sources that we recommend is canonservice.net, which provides various versions of Service Tool for Canon printers. You can download Service Tool V3200 from this website by following these steps:
Go to canonservice.net and scroll down to find Service Tool V3200.
Click on the \"Download\" button and wait for the file to be downloaded.
The file name is \"canonservice.net-Canon-Service-Tool-v5103-ST5103.zip\". You need to extract it using a program like WinRAR or 7-Zip.
After extracting the file, you will see a folder named \"Canon-Service-Tool-v5103-ST5103\". Open it and run the file named \"ST5103.exe\".
If your antivirus program detects a virus or malware, you need to temporarily disable it or allow the file to run.
How to Use Service Tool V3200 to Reset Canon Printers
Before using Service Tool V3200 to reset your Canon printer, you need to make sure that your printer is connected to your computer via USB cable and is turned on. You also need to put your printer in service mode by following these steps:
Turn off your printer and unplug the power cord.
Press and hold the Resume/Cancel button (the one with a red triangle inside a circle).
While holding the Resume/Cancel button, plug in the power cord and turn on your printer.
Release the Resume/Cancel button when the power LED flashes green.
Press and release the Resume/Cancel button four times. The power LED should flash green four times.
Your printer is now in service mode. You can proceed to use Service Tool V3200.
To use Service Tool V3200 to reset your Canon printer, follow these steps:
Run ST5103.exe and wait for it to detect your printer model and port.
In the main window of Service Tool V3200, click on \"Set\" under \"Absorber\". This will reset the waste ink counter of your printer.
Your printer will print a document with some information about the reset process. If a confirmation window appears, click \"OK\".
Next, click on \"EEPROM\" under \"Main\". This will reset other parameters of your printer.
Your printer will print another document with some aa16f39245